The 5310 series wildlife camera traps from Ltl Acorn are an excellent addition to their fantastic trail camera range.
The Ltl Acorn 5310A/WA is a portable infrared trail camera, it offers long running time, 1080P HD video resolution with audio recording & 12MP photos (interpolated from 5MP).
Often known as a game camera, scouting camera, hunting camera or wildlife camera trap – this device is also used extensively for security video surveillance in remote areas where connection to mains power is not possible.
Thanks to the built in infrared, it can capture video footage & photos in complete darkness or daylight and will only do so when motion is detected as it also has built in motion sensors.
The Ltl Acorn 5310A/WA can take photos of 12MP quality (interpolated from 5MP) or record video clips (with sound) at 1080P resolution. You can even set the camera to take a photo then a video clip if you want to, all triggered by movement within the camera view.
The 5310 cameras have password protection, 16G max SD card storage (SD card not supplied as standard), time & date stamping, timer recording (explained in the next paragraph) and even a time lapse feature that allows you to tell the camera to take a photo/video clip at set intervals regardless of whether any movement has been detected.
The built in Timers on the 5310A/WA are ideal if you want the camera to only trigger between certain hours of the day or night. For instance, you may want it to record in your back garden only at night time, so you can set it to trigger only between 8pm in the evening and 6am the next morning.
The amazing thing is that this feature packed trail camera comes in a palm size casing of approx 14cm x 8cm x 6cm!
The Ltl Acorn cameras are very easy to use, all set up is done via the built in LCD screen and the menu system – no software is required to use the non cellular Ltl Acorn cameras.
Since January 2018, the Ltl Acorn 5310A & 5310WA now features infrared brightness adjustment, this helps if you are trying to record video or take photos of subjects that are close to the camera and allows the user to adjust the night vision power in accordance with their own application – so “white out” problems in dark conditions can be eradicated. Another new feature added to the Ltl Acorn cameras in early 2018 is the much reduced standby power consumption, this means that your batteries should last a lot longer than previously and puts Ltl Acorn cameras one step ahead of much of the wildlife camera competition out there!
There are 2 lens options available, the 5310A is the standard lens model and the 5310WA is the wide angle lens model. The standard lens offers an angle of view of approximately 55 degrees whilst the wide angle lens offers approximately 100 degrees. Scroll through the product images to see a lens comparison which will help you decide the best lens version for your application.
The wildlife camera holds a maximum of 8 AA batteries, but can run off just 4. As you would imagine, the more batteries you fit the longer the running time.
Batteries are not included but battery choice is vital for the efficiency of your camera, do not use Duracell or Alkaline batteries and do not choose any batteries with a capacity lower than 2500mA. We recommend Panasonic Eneloop Pro 2500mA Rechargeable or Vapex Instant 2500mA Low Self Discharge Rechargeable AAs which you can purchase directly from us, they work very well with the Ltl Acorn cameras and are excellent value for money.
Infrared (Night Vision) Frequency:
The Ltl Acorn 5310A/WA uses the 940nm covert “no glow” infrared.
The Ltl Acorn wildlife cameras require an SD card to operate, without one inserted the camera will switch itself off immediately after power up. The 5310 cameras can hold a 16G SD card maximum. Always use SDHC and class 10 cards.
Infrared Brightness Adjustment:
Since January 2018, the Ltl Acorn trail cameras now feature infrared brightness adjustment, this helps if you are trying to record video or take photos of subjects that are close to the camera and allows the user to adjust the night vision power in accordance with their own application – so “white out” problems in dark conditions can be eradicated.
Low Power Consumption (in standby mode):
Another new feature added to the Ltl Acorn cameras in early 2018 is the much reduced standby power consumption, this means that your batteries should last a lot longer than previously and puts Ltl Acorn cameras one step ahead of much of the wildlife camera competition out there!
Other Information & General Maintenance:
Do not leave discharged batteries inside your Ltl Acorn camera for any prolonged length of time. The batteries will leak and this acid will corrode the circuit board. Battery leakage is very easy to spot and is not covered under the manufacturer warranty.
Cleaning the on/test/off switch on your trail camera is excellent ongoing maintenance and it’s a very simple procedure, no need to take the camera apart or anything like that. Click here for how to clean your Ltl Acorn camera switch.
Pakatak Ltd will always beat the prices available on Amazon UK for the Ltl Acorn wildlife camera range. Dealing direct with us also means much faster support and access to help direct from Ltl Acorn themselves should you require it.
Ltl Acorn 5310A / 5310WA Box Contents:
5310A / 5310WA Wildlife Camera Trap
TV Out Cable
Ltl Acorn Manufacturers Instruction Manual
Acorn 5310A / 5310WA – Quick Set Up Guide
(Information written by Pakatak Ltd – www.pakatak.co.uk)
Open the hatch at the base of the camera & insert an SD Card (16G max) and AA batteries (at least 4).
Please read the section further down the page about which batteries to use, battery choice is vital to the performance of your Ltl Acorn wildlife camera.
Carefully remove back plate from camera body using the clips on each side and hand-tightening screw on the back.
Flick the switch on the bottom of camera to the TEST position.
The LCD screen will come on (will go straight off again if you have not inserted a compatible SD card).
Push the MENU button & use the arrow keys to select & change settings.
Remember to push OK button after each setting change to save it.
Flick the switch to the ON position, LCD screen will now switch off & camera is now ready to start recording whenever motion/heat change is detected. You will see a red light blink on the front of the camera for about 10 seconds after switching the camera into ON mode, this is to give you time to move out of the sensor range to avoid recording yourself. Doesn’t matter if you get the odd selfie though!
Close bottom hatch & re-fit back plate before putting camera in chosen location. Use the side clips and the screw on the back to best seal the camera from the elements. The screw also takes some of the strain off the side clips
PLAYBACK on Cameras’ Built in LCD screen:
(You can also connect to PC or TV for playback)
In TEST mode push the Replay/OK button to enter Playback mode.
Use the up & down arrow buttons to scroll through your recordings.
Press the Shot/Right Arrow button to play a video clip.
Press the OK button again to leave Playback mode.
Product Support & Warranty :
For email product support please contact email@example.com, alternatively you can get in touch via the website live chat facility.
You can also find a wealth of knowledge, information & troubleshooting guides at:
Please note, your 1 year warranty is always looked after by your retailer.
However, here at Pakatak Ltd, we carry Ltl Acorn spare parts and are always happy to test your camera for you if you think it has developed a fault.
HINTS, TIPS, Do’s & Don’ts!
Batteries are not included but battery choice is vital for the performance of your Ltl Acorn camera, do not choose any batteries with a capacity lower than 2500mA.
We recommend Vapex Instant 2500mA Low Self Discharge Rechargeable AAs or, even better, Panasonic Eneloop Pro 2500mA Rechargeable AAs which you can purchase directly from us, they work very well with the Ltl Acorn cameras and are excellent value for money too. We use these batteries every day and so can vouch for their compatibility.
DO NOT use Duracell or other “off the shelf in the supermarket” Alkaline batteries as they are unlikely to be powerful enough and so will reduce the performance level of your camera.
Using batteries that are not powerful enough will often cause a problem with video recording at night time in dark or low light conditions. So you may find that your camera works perfectly during the day but then only records 1 second videos at night time (even if you have it set to record 10 or 20 second videos) for instance. This is due to the extra power required to run the infrared array, so the camera triggers to record and starts the recording, it then realises it does not have enough power to run the infrared for any length of time and so shuts down back into standby mode. This can happen over and over again whenever the camera is triggered, leaving you with lots of very short videos!
Do not use any battery with a mA rating of less than 2500mA.
Power issues can bring about many different and strange glitches and problems with any trail camera so it’s very important to use a battery that outputs enough power before assuming you have a fault with the camera itself.
IMPORTANT – Do not leave batteries inside the camera if you are not using it, this could result in acid leak and ruin the camera – this is not covered under warranty!
Always use genuine branded SD cards, there are often many fake cards on the market (especially being sold on eBay etc). Also, always format your SD card using the “format” option in the camera menu, or format the card on your home computer.
SD cards do not last forever, if you think that yours may have developed a fault then try a new card before assuming your camera is faulty.
If you think your camera has developed a fault, try a system reset as below:
Remove all batteries & SD Card, bring the camera inside for 24hrs then test again.
When in TEST mode, push the menu button and scroll down to “Default”, push OK to return your camera back to factory settings.
The infrared beam is powerful so don’t position the camera too close to any solid objects as your night shots could suffer “white out” issues. On cameras that came out of the factory from around early 2018 onwards you may have the Infrared Brightness Adjustment feature too. This feature allows you to adjust the strength of your cameras infrared beam and can help reduce white out problems with night time images or video.
Infrared Cut Filter (situated in front of the lens):
When moving the camera in your hand you may notice the IR cut filter moving in front of the lens, this is perfectly normal. When the camera is in operation, it will decide if the cut filter is needed automatically depending upon light levels.
We take a lot of calls and messages from customers thinking that they have a broken part on their camera but this is not the case!
If you find that your camera is not responding correctly to the switch position you have selected, for instance the LCD screen does not come on in TEST mode but the camera works fine in ON mode, or if you have the camera in TEST mode but it is acting as if in ON mode then it may be that the switch contacts have become dirty.
Please click on the link below and have a read of the post as this issue is easily solved and may save you the cost of returning a camera:
Cleaning Dirty Switch Contacts
This is something that is worth doing periodically anyway to ensure the best performance and longevity of your Ltl Acorn camera.
If your Ltl Acorn 5310A or 5310WA camera was bought from Pakatak Ltd after August 2016 then it will have the option of choosing from 9 different languages. The options are English, Danish, Dutch, Italian, German, French, Russian, Czech or Finnish.
When you have the camera in TEST mode, push the left arrow key to run through the various language options.
Please let us know by emailing firstname.lastname@example.org if you think of any other useful information that should be added to this guide.
Pakatak Ltd are the largest UK distributor of the Ltl Acorn range of wildlife trail cameras and deal directly with the manufacturer (we’re the only UK based company to do so!).